Important Safety Warnings - Fagor PL-2201 Manual De Instrucciones

manual.qxd 8/5/03 10:38

1. IMPORTANT SAFETY WARNINGS

• Before using your appliance for the first
time, read the following instructions
carefully and keep them for future
reference. Keep this manual throughout
the entire working life of the appliance.
• Make sure that the mains voltage in
your home corresponds to that
indicated on the appliance. Only
connect the appliance to an AC power
supply.
• The electrical safety of your appliance
is only guaranteed if it is connected to
an efficient earth installation. If in
doubt, contact a qualified professional.
• The appliance is designed for domestic
use only. Any other use is considered
unsuitable and therefore dangerous.
• Do not submerge the appliance in water
or any other liquid or hold it under a
running tap in order to fill the tank.
• Keep out of the reach of children.
• During use, the appliance reaches
extremely high temperatures and may
cause burns. Always pick the iron up by
the handle provided and avoid contact
with metal parts and steam.
• Never pull on the cable to unplug the
appliance.
• Periodically check the condition of the
appliance's cable. If damaged, have it
replaced by an authorised Technical
Assistance Service.
• Do not let the cable come into contact
with hot surfaces or the base of the iron.
• Unplug the appliance before filling or
emptying the water tank. During pauses
in the ironing process, place in an
upright position.
Página 7
All manuals and user guides at all-guides.com
GB
• When leaving the iron unattended after
use, even for a brief period of time,
make sure that you:
- Turn the temperature selector to the
'MIN' position;
- Set the iron in an upright position;
- Unplug the appliance from the
mains.
• If the iron (or cable) becomes damaged
and needs to be replaced, do not use
the appliance and take it to an
authorised Technical Assistance Service
for repair.
• Repairs carried out by non-qualified
individuals may cause accidents or
injury to the user.
• Improper or badly carried out repairs
may cause accidents or injury to the
user.
2. BEFORE USING YOUR IRON
• Remove all stickers or protective labels
from the base and the body.
• Unroll and straighten the electrical
cable.
3. DESCRIPTION (Fig. 1)
1. Stainless steel base
2. Self-cleaning button
3. Temperature selector
4. Pilot light
5. Spray outlet
6. Water inlet cover
7. Steam control
8. Extra steam button
9. Spray button
7
FOR THE FIRST TIME