Ethernet Connection - Delta DC Wallbox Charger Manual De Instalación Y Operación

7. Put front cover back and fasten screws securely.

Ethernet Connection

It is recommended to connect Ethernet cables through the underside access ports. It is necessary to
open front cover.
1. Remove the water proof cap from the Ethernet access port.
2. Insert the cable through the port and connect the Ethernet cable to the terminal.
3. Fasten the conduit or cable gland to secure the cable.
Note:
To insure protection from the elements, make sure to use certified IP55 (or above) cable
glands.
Installation and Operation Manual
3
1
14
Making the Connection
2