General Instructions; Working Environment - GYS GYSPRESS 10T PUSH-PULL Manual Del Usuario

WARNINGS - SAFETY REGULATIONS

GENERAL INSTRUCTIONS

This user manual includes instructions on how to operate your device and explains the precautions to
be followed for your safety. Please read it carefully before first use and keep it for future reference.
This equipment should only be used by professionals and should only be installed, adjusted or opera-
ted by qualified and experienced personnel.
Do not use this machine if any parts are missing or damaged. This product must not be modified in any way.

WORKING ENVIRONMENT

Slips, trips or falls are a major cause of serious, or even fatal, personal injury accidents. Pay attention to cables and
hoses left on the floor. This device is not intended for use in potentially explosive atmospheres. This device is in-
tended for indoor use in a well-lit environment on a flat floor.
ENVIRONMENT
This equipment should only be used within the limits indicated on the information plate and/or the user manual. The
safety guidelines must be observed. The manufacturer cannot be held responsible in the event of improper or dangerous
use.
Temperature ranges:
Operate between -10 and +40°C (+14 and +104°F).
Store between -20 and +55°C (-4 and 131°F).
Air humidity:
Less than or equal to 50% at 40°C (104°F).
Less than or equal to 90% at 20°C (68°F).
Altitude:
Up to 1,000 m above sea level (3,280 feet).
PROTECTING YOURSELF AN OTHERS
Observe the following safety instructions to properly protect yourself and others:
Always wear impact-resistant, protective eye wear when using the device.
Wear a safety helmet when working at heights.
Wear soundproofing headphones to protect your hearing in accordance with your employer's instructions
and as required by occupational health and safety regulations.
Wear protective gloves to limit the risks associated with exposure to vibrations and dangerous pheno-
mena, such as cuts or abrasions. Repeated movements and exposure to vibrations can harm your hands
and arms, shoulders, neck and other parts of the body. In the event of numbness, tingling or ankylosis,
stop using the machine and consult a doctor.
Wear safety shoes in order to avoid potential accidents when assembling the device or in the event of a
part falling from the equipment.
Wear a warm outfit when working in cold weather in order to keep your hands warm and dry.
Maintain a stable posture and secure footing when using this device. The operator should change posture during long
tasks; this can help to avoid discomfort and fatigue.
The tool should not be operated when directed at the operator or at any other person.
Keep hands away from the compression mechanism; holding the riveter with both hands is highly recommended.
Please be aware that broken arms or consumables can generate high-velocity projectiles.
Inspect for cracks on a regular basis; injury can occur if a cracked arm is dropped during use.
14
GYSPRESS 10T PUSH-PULL
EN