COMAC CM43 orbital spray Manual De Uso Y Mantenimiento página 15

• The machine must not be used or stored outdoors in damp conditions or directly exposed to
rain.
• The storage temperature must be between -25°C and +55°C.
• Conditions of use: ambient temperature between 0°C and 40°C with a relative humidity between
30 and 95%. The machine has been developed only for dry cleaning and it should not be used
or kept outdoors in moist conditions.
• Before using, make sure the machine and the work equipment and in particular the extension
cable are in a good condition. If there is any damage, immediately pull out the power plug from
the mains socket, the machine should not be used.
• When the machine is being used in hazardous locations (for example filling stations) the relative
safety regulations must be followed. It is forbidden to use the machine in areas with a risk of
explosion.
• Certain substances can form explosive vapours and mixtures together with intake air.
WARNING:
• Keep hair, loose clothing, fingers and all body parts away from openings and from moving parts.
• Do not approach the machine with clothes that could get entangled: AVOID the use of scarves,
shawls, wraps and loose clothing.
• Use of the machine is permitted for children over 8 years of age and people with reduced
physical, sensorial and metal capacities or people with no experience or understanding,
as long as they are supervised or have received instructions regarding the safe use of
the appliance and understand the related risks.
• Children must be supervised to make sure they do not play with the appliance.
• Children should not do any cleaning or maintenance that is the responsibility of the user without
supervision.
• This machine should only be used in enclosed areas.
• Never leave the machine unattended when it is connected to the mains. Pull out the power plug
from the mains socket when not in use and before any maintenance.
• In low temperatures, the machine should not be used out in the open.
• Do not use the machine on surfaces with a slope greater than the one indicated on the serial
number plate.
• Always make sure that the work surfaces, floors and ramps, are able to withstand the weight of
the machine.
• The machine is not suitable for cleaning rough or uneven floors. Do not use the machine on
slopes.
• In the event of danger, quickly remove the power cable plug from the mains socket.
CAUTION:
• Avoid working over pieces of rope, wire, cables: these can be caught in the brush and create
friction.
• The machine is designed to clean carpets or fabric flooring, if used with the specific accessories.
• Polishing operations should only be carried out in areas where the passage of unauthorised
persons is prohibited. Signal the presence of work areas with suitable signs.
• Attention: do not let the power cable come into contact with the rotating brush.
• The machine does not cause harmful vibrations.
• Do not place any liquid containers on the machine.
• In the event of a fire, use a powder extinguisher. Do not use water.
• Avoid the brush or the pad holder works with the machine at standstill, so as not to damage the floor.
15