Description Of The Hood - Yale PCHLC630SS Guía De Instalación, Uso Y Mantenimiento

Mounting the duct cover
NOTE: Upper Duct Cover may be placed upside down to hide (or
unhide) louver holes.
• Position the duct cover over the mounted hood.
• Slide the bottom of the duct into the canopy area.
• Position the top of the duct over the duct mounting bracket.
If a telescopic duct cover is used, grab the upper part of the
telescopic duct cover, pull it and place it in the duct cover
mounting bracket.
• Secure the top of the duct with 2 assembly screws provided.
• Secure the bottom of the duct with 2 assembly screws
provided.
• Install the grease filters and turn power on at service
panel. Check operation of the hood.
If range hood does not operate:
• Check that the circuit breaker is not tripped or the house
fuse blown.
• Disconnect power supply. Check that wiring is correct.
To get the most efficient use from your new range hood, read the
"Maintenance" section.
Keep your Installation Instructions and Use and Care Guide close
to range hood for easy reference.

Description of the hood

5
1
2
1. Blower and LED lamp controls
2. LED lamps
3. Grease filter handle
3
4
4. Grease filters
5. Duct covers
9