Brandson Equipment 303335 Manual Del Usuario página 30

Then select the desired temperature using the "Temperature controller". "Minus
(-)" is the lowest temperature setting and "Plus (+)" is the highest temperature. To
switch off the appliance completely, disconnect the mains plug from the socket.
This temperature is maintained almost constant by switching the appliance on
and off automatically. Please remember that the appliance only heats when the
thermostat setting is higher than the room temperature.
7. Overheating
Overheating generally occurs only if one of the openings of the fan heater is
blocked. This appliance comes with a non self-resetting thermal fuse. The heater
switches off automatically once the overheating temperature is reached. The fan
heater can be operated again only after the fuse is replaced by the manufacturer
or by an equally qualified person.
8. Oscillation
The oscillation can be switched On or Off using the oscillation switch at the back.
9. Cleaning and Care
Completely switch off the appliance and disconnect it from the power supply be-
fore you start cleaning it. Clean the housing with a slightly damp cloth, a vacuum
cleaner or a dusting brush. Never use flammable, aggressive or scouring cleaning
agents such as benzene or spirit to clean the appliance.
30
English