Safety Warnings For Screwdrivers - Bosch IXO Manual Original

Ocultar thumbs Ver también para IXO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Do not expose a battery pack or tool to fire or excessive temperat-
u
ure. Exposure to fire or temperature above 130°C may cause explosion.
Follow all charging instructions and do not charge the battery pack
u
or tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair person using only
u
identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Never service damaged battery packs. Service of battery packs should
u
only be performed by the manufacturer or authorized service providers.

Safety Warnings for Screwdrivers

Hold the power tool by insulated gripping surfaces, when performing
u
an operation where the fastener may contact hidden wiring. Fasten-
ers contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Use suitable detectors to determine if there are hidden supply lines
u
or contact the local utility company for assistance. Contact with elec-
tric cables can cause fire and electric shock. Damaging gas lines can lead
to explosion. Breaking water pipes causes property damage.
Hold the power tool securely. When tightening and loosening screws be
u
prepared for temporarily high torque reactions.
Before any work on the power tool (e.g. maintenance, tool change,
u
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
Secure the workpiece. A workpiece clamped with clamping devices or in
u
a vice is held more secure than by hand.
Always wait until the power tool has come to a complete stop before
u
placing it down. The application tool can jam and cause you to lose con-
trol of the power tool.
Protect the power tool against heat, e.g. against con-
tinuous intense sunlight, fire, water, and moisture.
There is a risk of explosion.
Bosch Power Tools
English | 25
1 609 92A 6RC | (02.05.2022)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ixo 7

Tabla de contenido