Safety Warnings For Screwdrivers - Bosch PSR Select Manual Original

OBJ_DOKU-28872-003.fm Page 27 Tuesday, August 19, 2014 5:11 PM
Service
 Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the pow-
er tool is maintained.

Safety Warnings for Screwdrivers

 Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
 Hold the machine with a firm grip. High reaction torque can briefly
occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamping devices or in
a vice is held more secure than by hand.
 Always wait until the machine has come to a complete stop before
placing it down. The tool insert can jam and lead to loss of control over
the power tool.
 Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of
the On/Off switch can lead to injuries.
Protect the power tool against heat, e. g., against continuous
intense sunlight, fire, water, and moisture. Danger of explo-
sion.
 In case of damage and improper use of the battery, vapours may be
emitted. Ventilate the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
Safety Warnings for Battery Chargers
This charger is not intended for use by chil-
dren and persons with physical, sensory or
mental limitations or a lack of experience or
knowledge. This charger can be used by chil-
Bosch Power Tools
English | 27
1 609 92A 0V2 | (19.8.14)