Publicidad
Idiomas disponibles
Idiomas disponibles
1
1. Seperate the front and back panels by inserting a screwdriver into the slots shown and turning clockwise slowly.
2. Route the control cable thhrough the cable entry and secure the back panel to a suitable flat surface using the
screws provided. Do not overtighten.
3. Connect the control cable to the terminal block on the front panel and refit the front panel to the back panel.
4. Remove the protective film from the screen.
EN
INSTALLATION
3
2
20
4
PMML0297 rev.0 – 08/2018
1
Front Panel
2
Back Panel
3
Securing Screw
4
Cable Entry
99
113
EN
3
Publicidad
