Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex PD 2G 18.0-EC-HD Instrucciones De Funcionamiento

PD 2G 18.0-EC-HD

Symbols used in this manual

WARNING!
Denotes impending danger. Non- observance
of this warning may result in death or
extremely severe injuries.
CAU TION!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in
slight injury or damage to property.
N OTE
Denotes application tips and important
information.

Symbols on the power tool

V Volts
/min Rotation rate
To reduce the risk of injury, read the
operating instructions!
Disposal information for the old
machine (see page 17)!

For your safety

WARNING!
Before using the power tool, please read the
follow:
these operating instructions,
the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
The percussion drill driver may be used only
as intended,
in perfect working order.
Faults which impair safety must be repaired
immediately.

Intended use

The percussion drill driver is intended
– for commercial use in industry and trade,
– for inserting and releasing screws
– for drilling in wood, metal, ceramic and
plastic,
– for impact drilling in brick, masonry and
stone.
Safety instructions forpercussion
drill driver
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
■ Hold the power tool by insulated
gripping surfaces, when performing an
operation where the cutting accessory or
fastener may contact hidden wiring. The
cutting accessory or fastener contacting a
"live" wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
■ Use auxiliary handles if these are
supplied with the power tool. The loss of
control may result in injuries.
■ Use suitable detectors to detect
concealed power supply cables or
consult your local supply company.
Contact with electric cables may result in
a fire and/or electric shock. A damaged
gas pipe may cause an explosion. Cutting
into a water pipe will cause damage to
property.
■ Switch off the power tool immediately
when the cutting accessory jams. Be
prepared for high reaction torques
which cause kickback. The cutting
accessory jams when:
– the power tool is overloaded or
– it snags in the workpiece to be
machined.
■ Maintain a firm grip on the power tool.
High reaction torques can occur briefly
when screws are tightened and released.
13