Symbols Used In This Manual; Symbols On The Power Tool; Important Safety Information - Flex DD 2G 10.8-LD Instrucciones De Funcionamiento Originales

Symbols used in this manual

WARNING!
Denotes impending danger. Non-observance of this warning
may result in death or extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation. Non-observance
of this warning may result in injury or damage to property.
NOTE
Denotes application tips and important information.

Symbols on the power tool

Before switching on the power tool for the
first time, read the operating manual.
Wear protective goggles.!
Short-circuit-proof safety transformer.
Protect the battery against heat, including
prolonged sunshine, and fire.
Explosion hazard!.
Do not throw the battery into a fire. Explo-
sion hazard!
The tool is only suitable for use indoors. Do
not expose the tool to rain. Store power tools
and batteries in dry rooms.
Disposal information (see page 18).

Important safety information

WARNING!
Read all the safety instructions and general
instructions. Failure to comply with the safety instructions
and general instructions may result in electric shock, fire
and/or serious injuries. Keep all safety instructions and
general instructions in a safe place for future reference.
Before using the power tool, please read the following and
act accordingly:
– these operating instructions,
– the "General safety instructions" on the handling of power
tools in the enclosed booklet (leaflet no.: 315.915),
– the currently valid site rules and the regulations for the
prevention of accidents.
12
This power tool is state of the art and has been constructed
in accordance with the acknowledged safety regulations.
Nevertheless, when in use, the power tool may be a danger
to life and limb of the user or a third party, or the power tool
or other property may be damaged.
The power tool may be operated only if it is
– for its intended use,
– in perfect working order.
Faults which compromise safety must be repaired
immediately.
Intended use
The DD 2G 10.8-LD cordless drill driver is intended
– for commercial use in industry and trade,
– for inserting and releasing screws,
– for drilling in wood, metal, ceramic and plastic.
Safety instructions for drills and drivers
 Hold the power tool by the insulated gripping
surfaces when performing an operation where
the cutting accessory or the screw may contact
hidden wiring or its own power cord.
The screw contacting a "live" wire may make exposed metal
parts of the power tool "live" and cause an electric shock.
 Use auxiliary handles if these are supplied with the
power tool. The loss of control may result in injuries.
 Use suitable detectors to detect concealed power
supply cables or consult your local supply company.
Contact with electric cables may result in a fire and/or
electric shock. A damaged gas pipe may cause an
explosion. Cutting into a water pipe will cause damage to
property.
 Switch off the power tool immediately when the
cutting accessory jams. Be prepared for high
reaction torques which cause kickback. The cutting
accessory jams when:
– the power tool is overloaded or
– it snags in the workpiece to be machined.
 Maintain a firm grip on the power tool.
High reaction torques can occur briefly when screws are
tightened and released.
 Secure the workpiece. A workpiece is held more
securely in a clamping device or vice than by hand.
 Wait until the power tool has come to a stop before
putting it down. The cutting accessory may snag, causing
the operator to lose control of the power tool.
 Use only original batteries with the voltage indicated
on the type plate of your power tool. The use of other
batteries, e.g. imitations, reconditioned batteries or other
makes, increases the risk of injury and damage to property
by exploding batteries.
Safety instructions for handling batteries
 Do not open the battery. Shortcircuiting hazard!
 Protect the battery against heat, including
prolonged sunshine, fire, water and moisture.
Explosion hazard!
 A damaged or incorrectly used battery may result in the
emission of fumes. Ensure a supply of fresh air and
consult a doctor in the event of any physical complications.
The fumes may irritate the respiratory tracts.
DD 2G 10.8-LD