Important - Emerson Rosemount 3410 Serie Manual De Operación

Manual de operación
00809-0809-3104
Ethernet initial connection steps
Procedure
1. Power up the meter.
2. Shutdown the PC.
3. Plug the Ethernet adapter cable Phoenix end into the meter Field Connection Board
4. Enable the Ethernet LAN connector DHCP server on the CPU Module by moving the
5. Power up (boot) the PC and log in to the initial Windows logon prompt.
6. Verify the Ethernet connection status by the CPU Module "LINK" LED which should
7. Launch MeterLink and create a new meter record.
Import a meter record
Procedure
1. Select File → Import from the Meter Directory drop-down menu or click Import.
2. The Import Meter Directory File dialog which allows you to select a meter
Export a meter record
Use the Export command to save the current meter directory to file. Select File → Meter
Directory from the Meter Directory drop-down menu or click Export.
Procedure
1. Enable the meter directory record checkbox you want to export or click Select All.
2. Click OK to begin exporting the meter record(s). Use the Export Meter Directory File
3. Click Save. If you have an existing METER_DIRECTORY_EXPORT.DAT file, you are
4. Copy the exported file to the new machine.
5. Use the Import command to select this file and import it into the Meter directory.
GUSM Rosemount modelo 3418
connector J8 and connect the RJ-45 end into the PC Ethernet connector.
DHCP (switch-1) to the ON position (see direction arrow on the CPU Module label).
be on solid green.
directory .DAT file to import the file into the currently used meter directory file.
If an identical meter record already exists and a duplicate is trying to be imported,
MeterLink inserts the duplicate meter record. The Import button performs the
same operation.
dialog to save the exported record to the default folder (C:\Ultrasonic Data) or enter
another location.
prompted to change the file name or replace the file. If changing the file name,
keep the .DAT extension to maintain functionality when importing the file to the
new machine.

Important

Due to limitations in the Microsoft
information for Direct and Modem connection can be exported to the
METER_DIRECTORY.DAT file for Rosemount Ultrasonic meters. It will be able to
export the meter names, Comms Address, Interface, and Telephone numbers. It will
still be necessary to recheck the connection properties and verify the
®
Dial-Up Networking, not all of the directory
Comunicaciones
Abril 2022
11