General Specifications - Klein Tools ET140 Manual De Instrucciones

ENGLISH

GENERAL SPECIFICATIONS

Klein Tools ET140 is designed to non‑invasively detect moisture based
on a material's capacitance. The mode selection is setup to maximize
moisture readings for up to 3/4" of the depth of the surface of drywall,
cement board, hardwood, and softwood.
• Moisture Detection Range:
Hardwood: 0 to 35%
Softwood: 0 to 55%
Drywall & Masonry: 0 to 100% Relative
• Resolution: 0.1%
• Accuracy: Wood: ± 4%
Drywall & Masonry: Relative readings
• Inductive Sensor Size: 1.25" x 2" (32 mm x 51 mm)
• Sensing Depth: Up to 3/4" (19 mm)
• Operating Altitude: 6562 ft. (2000 m)
• Relative Humidity: <90% non‑condensing
• Operating Temp: 50° to 104°F (10° to 40°C)
• Storage Temp: ‑4° to 122°F (‑20° to 50°C)
• Dimensions: 6" x 2.5" x 1" (152 x 64 x 25 mm)
• Weight: 7 oz. (200 g) including batteries
• Certifi cations: CE, UKCA
• Batteries: 1 x 9V (included)
• Drop Protection: 6.6 ft. (2m)
Specifications subject to change.
2
To ensure safe operation and service of the meter, follow these
instructions.
• Read the instructions to ensure safe operation.
• The meter is NOT insulated. Avoid contact with areas where
energized conductive elements may be present.
• Always wear approved eye protection.
SYMBOLS ON METER
Warning or Caution
Wear approved eye protection
WEEE - Dispose of properly
Conformité Européenne: Conforms with European Economic
Area directives
UKCA: UK Conformity Assessment
FEATURE DETAILS
1 FRONT
B
A
3
METER FEATURES
1.
LCD Display
2.
Bar Graph
3.
MODE Button
4.
Power On/Off Button
5.
HOLD Button
6.
Sensor
7.
Battery Cover
WARNINGS
Risk of electrical shock
Read instructions
Battery Polarity
BACK
6
C
E
D
2
5
4
7
LCD FEATURES
A.
Moisture Measurement (%)
B.
Modes
C.
Low Battery Indicator
D.
HOLD Indicator
E.
Auto‑Power Off Icon
NOTE: There are no user-
serviceable parts inside.
3