Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
rePlaCinG tHe ProPeller
replacing the propeller
You can replace the original propeller on your Crash FX if the original one becomes
damaged or is lost . One spare propeller is included in the Crash FX package .
NOTE: Adult supervision is required when changing the propellers .
To replace the damaged propeller, follow the instructions below:
1 .
Make sure the remote controller and Crash FX are turned off .
2 .
Using a pair of pliers (not supplied), carefully grasp the propeller and pull it off
the axle as indicated .
3 .
Insert the new propeller into the axle gently
and carefully, making sure it is secure .
Be careful not to damage the motor .
4 .
Test the propeller by turning it manually
to make sure it does not touch the propeller guard .
storage
When you have finished playing with Crash FX you should store it safely with the
remote controller .
IMPORTANT: Always recharge Crash FX before storing it . Severe battery depletion
may result in permanent battery failure .
8
Publicidad
Tabla de contenido
