Bellman & Symfon BE1420 Manual De Instrucciones página 59

Using it as a doorbell
The transmitter can also be
used as a wireless doorbell.
Here is how you set it up:
Mounting with screws
1 Carefully remove the
transmitter front cover and
make two holes on the
markings.
2 Fix the unit to the wall
using the supplied screws
and put the cover back on.
116
1
2
Using it as a doorbell
You can instead choose to use
the supplied adhesive tape.
Here is how it is done:
Mounting with adhesive tape
1 Attach the adhesive tape to
the back of the transmitter.
Clean the wall with the
wet wipe and remove the
protective film from the
tape.
2 Mount the unit in a
weather protected area
by the front door.
1
www.bellman.com
Bellman Visit 868 Pushbutton transmitter
Model: BE1420
Frequency 868,3 MHz
Battery: 1 x 6V
Made in P.R.C. by Bellman & Symfon AB, Sweden
2
117
App