Remote Control - HOMCOM 820-258V90 Manual De Montaje E Instrucciones

25. The use of attachments or accessories not recommended or sold by the product
distributor may cause personal or property hazards or injuries.
26. This product is intended for normal domestic/household use only.
Use this heater as described in this manual. Any other uses, not recommended by the
manufacturer, may cause fire, electric shock, or injury to persons and may void the
warranty.
OPERATION
1. Before inserting the plug into an electrical outlet, make sure that the electrical
supply in your area matches that on the rating label on the unit.
2. When plugged in, turn on the Main power switch at the back of the unit.
3. When in Standby mode, only the switch
your touch, and the LED display shows the room temperature. Press
the rest of the control panel
a) Low Power: 1000W (Press
b) High Power: 2000W (Press
c) TIMER: Press this button
turn itself off (From 0 hour – 8 hours)
d) + , - : adjust room temperature .Temperature setting from 10-35 degree. "+" to
increase the desired temperature and "-" to decrease the desired temperature.
(Remote control only)
e) Osc : Press
f) Press . to turn off the heater, the unit will keep working 30 seconds of cool air
after turn off it . this design can protect item use longer.
Warning:
The heater will remain hot for some time after it is turned off; handle with care.

REMOTE CONTROL

Please use Lithium battery CR2025 3V.
NOTE: the remote control buttons perform the same functions as those on the control
panel on the unit.
to switch it)
to switch it)
repeatedly to set a period after which the heater will
to activate oscillation. Press it again to cancel.
on the control panel will respond to
3
EN
to access