WERKU WK400110 Instrucciones Originales página 3

ENG
invites to accidents
►
before starting the power tool
attached to a rotating part of a power tool can
cause personal injury.
USE AND CARE OF POWER TOOLS.
Do not force the power tool
►
power tool for your application
tool will do the job better and safer at the rate for
which it was conceived
if the switch cannot be positioned to "off" and "on"
position Any power tool that cannot be controlled
►
with the switch is dangerous and must be repaired
Remove the plug from the power supply and/or
►
battery before making any adjustments, changing
accessories or storing the power tool
preventive safety measures reduce the risk of
starting the power tool accidentally.
STORE POWER TOOLS.
Store power tools out of reach of children and
►
not allow the handling of power tools to people
unfamiliar with the tools or these instructions
Power tools are dangerous in the hands of
►
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions
that may affect the operation of power tools
Power tools are repaired before use when they
►
are damaged Many accidents are caused by
►
poorly maintained power tools
accessories and tool tips, etc. according to these
instructions and in the manner provided for the
particular type of power tool, taking into account
the conditions work and work to develop
of the power tool for applications other than those
intended could result in a dangerous situation
Please check your power tool serviced by a
►
Werku official repair service using only identical
®
replacement parts
►
the power tool is maintained.
CHECK THE GOOD CONDITION OF THE
POLISHER.
Make sure that all the screws in the polisher are
►
perfectly tightened In cold climates or when the
►
polisher has not been used for a period, allow the
polisher to warm up by leaving it to run empty for a
few minutes, to ensure that all internal components
are perfectly lubricated
installed accessories are perfectly fitted in place.
Remove keys or tools
A left key or tool
►
Use the correct
►
The correct power
►
Do not use the power tool
►
Such
►
Use power tools,
►
►
This will ensure the safety of
Make sure that the possible
►
BEFORE STARTING WORK.
Make sure that the suction polisher is firmly
►
supported before using
standing beneath you when using the suction
polisher in high areas
from all moving parts of the suction polisher.
DURING THE OPERATION.
Do not leave the suction polisher operating without
►
having it firmly fixed
sure you have full control over it
suction polisher at anyone while in use
operating the suction polisher will produce vibrations
The screws may gradually come loose, and
►
possibly cause faults or accidents
away from all moving parts of the suction polisher.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the suction polisher after use
cause burns
contain chemicals or toxic components
inhaling these substances or allowing them to come
into contact with your skin
prevent and protect against incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The polisher has been designed to carry out jobs
►
of polishing, buffing and waxing of bodywork of
painted and varnished surfaces
to familiarize yourself with the polisher before use.
5
The use
1. Auxiliary handle.
2. Speed selector.
3. Handle.
4. Switch.
5. Carbon brushes access.
6. Plate support.
3
English
Check that no one is
►
Keep your hands away
►
Only turn it on when you are
►
Do not point the
►
►
It may be hot and
►
Some materials worked with may
►
Use PPE designed to
►
Refer to this plan
►
2 3
When
►
Keep your hands
Avoid
►
4
1
6