WERKU WK400110 Instrucciones Originales página 4

ENG
USE INSTRUCTIONS.
Before starting up the polisher, we recommend
►
that you carefully read all of the instructions as
indicated Please respect all regulations regarding
►
the prevention of accidents, health and safety
directives, laws and applicable restrictions for
work places The polisher must only be used
►
by persons who have been instructed in its use
and only for the purposes for which it has been
designed.
POWER SUPPLY.
Make sure the power supply is adapted to the
►
requirements shown on the information panel of
the polisher (1) Using the motor at low voltage
►
will make it operate slowly
performance and may cause the motor to overheat.
EXTENSION CORD.
If the working area is at some distance from the
►
power supply, use an extension cord of enough
diameter and quality.
FITTING THE BACKING PAD.
The Backing Pad must be securely fitted to
►
the spindle before use
of the spindle with a suitable spanner, and hold
in position (2) The backing pad can now be
►
screwed onto the spindle and tightened
backing pad is tightened by hand (3)
not to crossthread or over-tighten
spanner.
FIXING THE POLISHING BONNET.
Disconnect the polisher from the power supply
►
before making any adjustments or replacing
accessories The polishing bonnet are held in
►
place with velcro (4)
over the plate so that their edges meet (5)
the polishing bonnet in place onto the base until it
is firmly held in place (6).
SPEED CONTROL.
Adjust with the buttons the speed control
►
depending on the different materials to work.
USING THE POLISHER.
Before starting to work, apply the correct
►
polishing product onto the work surface, which
may be of different types depending on the work
being carried out (polishing, buffing or waxing)
Click the switch to the 'on' position
►
polisher to run for a few seconds until reaching the
This will reduce
►
Engage the flat part
►
►
Take care
►
Remove the
►
Align the polishing bonnet
►
Allow the
►
correct speed
place the head of the polisher in contact with the
surface being worked on, pressing down gently
and using circular movements
not to press down on the polisher when working
on edges.
MAINTENANCE.
The polisher has been designed for a long
►
working life with minimum maintenance
use depends on correct care of the polisher and
regular cleaning
unplug the polisher from the power source
before cleaning or performing any maintenance
The polisher may be cleaned effectively using
►
compressed air after each use
is not available, use a brush to remove dust from
the polisher
levers must be dept clean and free of foreign matter
Do not attempt to clean by inserting pointed
►
objects through openings
and solvents damage plastic parts, among them
are gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household
cleaners containing ammonia
of these to clean the polisher
sparking occur, have a Werku
The
service exam and/or replace the carbon brushes.
ENVIRONMENT PROTECTION.
The materials and components that have
►
been used to manufacture this product can be
re-used and recycled
an Integrated Management System that is in
charge of the correct elimination of the residues
of this product
with domestic residues
Press
►
clients a free collection service of these residues
through any of its sale points, or in the collection
points established by the Integrated Management
System or in the recycling point of your locality.
WARRANTY AND TECHNICAL SERVICE.
Apart from the legal guarantee, Werku
►
an additional commercial guarantee
commercial guarantee covers the repair of all
defects found due to faults in the materials or
manufacture
necessary for these defects to appear within the
validity period
repair of all defects that Werku
4
English
Holding it firmly with both hands,
►
Take special care
►
To prevent accidents, always
►
If compressed air
►
Motor ventilation vents and switch
►
Cetain cleaning agents
►
Do not use any
►
Should excessive
►
official repair
®
Werku is adhered to
► ®
Do not eliminate this product
►
Werku
► ®
For this cover to be effective it is
►
The consumer is entitled to free
►
recognises as
®
Optimum
►
offers to its
offers
®
This
►