Sime SHP M PRO Manual De Funcionamiento página 115

The unit will run according to the figure below:
6.3.2 WEEKLY SCHEDULE(Take ONE ZONE as an example)
The WEEKLY SCHEDULE function is used to set different operation mode
and temperature within one week (One day or more).
If "WEEKLY SCHEDULE" and "TIMER" are both set, and "TIMER" is set
later than "WEEKLY SCHEDULE", then the "TIMER" setting is valid, the
"WEEKLY SCHEDULE" is invalid.
If WEEKLY SCHEDULE is activated, is displayed on home page.
7
Go to " "> ''SCHEDULE" > "WEEKLY SCHEDULE". Press '' '', the
following page will appear:
SCHEDULE
WEEKLY SCHEDULE CANCEL
TIMER
SCHEDULE CHECK TIMER
MON. TUE. WED. THU. FRI. SAT. SUN.
ENTER CANCEL
MON SELECT
41