Adjusting The Operation Mode - Sime SHP M PRO Manual De Funcionamiento

5.4 Adjusting the operation mode

Go to " " > "OPERATION MODE'', then press "
will appear:
OPERATION MODE
Operation mode setting：
There are three operation modes on the controller interface: HEAT mode,
COOL mode and AUTO mode, Use ''◄''， ''►'' to select the mode and
press " ".
HEAT mode=space heating mode, COOL mode=space cooling mode.
The mode selected will still be valid when exiting the interface by pressing
" " from the page above.
About AUTO mode:
The unit will select the operation mode automatically based on the
outdoor temperature and some settings in "FOR SERVICEMAN".
It is not recommended for non-professionals to enter "FOR
SERVICEMAN".
HEAT
COOL
CONFIRM
INFORMATION
i
", the following page
AUTO
A
19