Sime SHP M PRO Manual De Funcionamiento página 127

6.6.3 PARAMETER
The PARAMETER function is used to display the main parameters.
Go to " ">"SERVICE INFORMATION" >"PARAMETER", the following
page will appear:
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
ROOM SET TEMP.
MAIN SET TEMP.
TANK SET TEMP.
ROOM ACTUAL TEMP.
ENTER
6.6.4 DISPLAY
The DISPLAY function is used to set the interface.
Go to " ">"SERVICE INFORMATION" >"DISPLAY", the following page
will appear:
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
TIME
DATE
LANGUAGE
BACKLIGHT
ENTER
1/2
DISPLAY
26℃
55℃
55℃
24℃
1/2
DISPLAY
12:30
08-08-2018
EN
ON
53
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
MAIN ACTUAL TEMP.
TANK ACTUAL TEMP.
ENTER
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
BUZZER
SCREEN LOCK TIME
ON/OFF
2/2
DISPLAY
26℃
55℃
2/2
DISPLAY
ON
120SEC