Ethernet Line Connection - Ditel DN109/NB Manual Tecnico

TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB - DN129/NB
CHAPTER 21

Ethernet line connection

Ethernet connection is done by a RJ-45 connector, located at the bottom of the display.
The display can be connected directly to a computer or to a network, usually using a
switch or hub module. We recommend at least 100Base-T4, cat5.
More than one display can be connected to the same network.
INSTALLATION
Fig. 90: Direct computer connection diagram.
ETHERNET
Fig. 91: Example
21-5