Ditel DN109/NB Manual Tecnico página 189

TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB - DN129/NB
CHAPTER 26
•
Display address: 14
•
Header: 02h AL AH
•
End block: CR LF
•
MSG. OFFSET: 1 (To display only the numerical value)
•
VIEW: NORMAL
•
MSG.CURSOR: 4
•
Send data: PESO 15.8kg
Transmission block
ASCII Block 4
HEX Block 02h 34h 31h 50h 45h 53h 4Fh 20h 31h 35h 2Eh 38h 6Bh 67h 0Dh
HEADER
Displayed value on a
4 digits device
Choosing MSG.OFFSET = 1 the display has ignored all the characters prior to the first
numerical value, without the need to count them.
It is important to choose MSG.CURSOR = 4 ("15.8" is made up of 4 characters "."
included), since after the first number the viewer will try to display everything up to the end block.
If NOT selected, the following displays would be obtained. Since display cannot present
some characters (like k and g), it displays "-".
Displayed value on a
4 digits device
Displayed value on a
8 digits device
SERIAL COMMUNICATION
1 P E S O 1 5 . 8
Send Data
1 5.
1
1 5.
26-7
k g CR LF
0Ah
ENDBLOCK
8
5. 8 -
8 - -