Configuration With "Display Discoverer - Ditel DN109/NB Manual Tecnico

TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB - DN129/NB
CHAPTER 22

Configuration with "Display Discoverer"

By default, the viewer comes from factory with IP address 10.30.90.10. To change the IP
you have to select the default IP and press "Change IP" button. Once done, press "Refresh" to
view the new IP. IP address can be changed any time is needed.
If an automatic IP address is desired, press "Auto-Assign IP". This will set display to
DHCP mode.
Double-clicking on the already modified address will open the browser to the web server
page. It can also be accessed by typing the IP directly in the browser.
INITIALIZATION
Fig. 92: "Display Discoverer" software window.
Fig. 93: IP changing window.
22-2