Hisense WFQP8014EVM Serie Manual Del Usuario página 19

Displayed on Display Window
"F01"
"F03"
"F13"
"F14"
"F24"
else fault code, "F04-F98"
"Unb"
a. "F01" displayed on screen
The machine is not fed with water or insufficient water. Check:
Faucet is fully open and has enough water pressure.
Water inlet pipe is knotted or not.
Filtering net of water inlet pipe is blocked or not (refer to maintenance and
repair).
Water pipe is frozen or not.
Press "Start/Pause" key after fault is removed.
If fault occurs again, please contact with after-sale service (refer to after-sale
service.).
b. "F03" displayed on screen
The washer is not emptied. The washer stops the program being executed. Shut
down the machine and disconnect power supply. Check:
Drain pipe is knotted or not.
Filter in drain pump is blocked or not (refer to the cleaning of filter in drain pump)
Ensure that
Fault Code List
Fault Description
Water inflow fault
Drainage fault
Door lock fault
Door unlock fault
Overflow or too much foam.
Electronic module fault.
Unbalance alarm
Spin
Start/Pause
16