Connection; Important - Tripp-Lite BP24V9T Manual Del Propietário

Connection

IMPORTANT: The BP24V9T external battery pack is only compatible with SMART1500PSGLCD UPS
systems. Do not attempt to connect this external battery pack to any other UPS models.
1
To connect the units, simply plug the BP24V9T external battery cable into the external battery connection port of the
SMART1500PSGLCD UPS.
2
Once the units are properly connected, update the P15 menu setting. To do this:
• Press and hold the
• Press the button to navigate to the P15 menu selection on the UPS LED display.
• Press the button on the UPS to select the P15 Menu.
• Use the button on the UPS to turn the BP24V9T external battery selection to ON, as shown in the graphic below.
• Press the button on the UPS to approve the setting selection.
button on the UPS for 2 seconds to enter the menu.
3