Tripp-Lite SMART600PSGLCD Manual Del Propietário página 14

8. Operation
No. Selectable Information
8 Output in Watts
9 Output Load %
10 Master Outlet Power
Consumption
11 Detachable LCD Module
Battery Voltage
12 Panel Board Firmware
Version
13 Base Board Firmware
Version
14 UPS Control Board
Firmware Version
LCD Screen Additional Information
Values indicate the UPS output load wattage of equipment
connected to all Battery Backup Outlets combined (includes
the Master Battery Backup and Surge-Protected Outlet).
Values indicate the UPS output load percentage consumed
by equipment connected to all Battery Backup Outlets
combined.
Values indicate the Master outlet load wattage reports power
consumption for the single device connected to the master
outlet (the Master outlet is most commonly used to power
your CPU device).
Values indicate the voltage of the miniature internal NiMH
battery that powers the LCD Panel when it is removed from
the UPS (full-charge is approximately 3.0V DC).
Indicates the firmware version.
Indicates the firmware version.
Indicates the firmware version.
14