Troubleshooting
If you have any problems with your appliance, you should check the
troubleshooting prior to calling the Customer Care.
If the appliance is not working, check:
• That there is power to the appliance.
• The house fuses are intact and the fuse in the plug has not
blown.
• The appliance has not been turned off at the socket or on the
control panel
• The plug socket is functioning fine. To check this, plug another
electrical appliance in to see if the socket is faulty.
If the appliance is working, but not very well, check:
• The appliance is not overloaded.
• The thermostat is set to an appropriate temperature.
• The doors are closing properly.
• The cooling system at the rear of the appliance is clean and free
of dust, and not touching the rear wall.
• There is enough ventilation at the side,rear walls and
underneath.
If the appliance is noisy, check:
• The appliance is level and stable.
• The side and rear walls are clear, and there is nothing resting on
the appliance.
• Note: The cooling gas in the refrigerator may make a slight
bubbling or gurgling noise, even when the compressor is not
running.
If the appliance is beeping, check:
• That the doors are closed. An alarm will sound after 60 seconds
of a door being open.
17