Mounting The Fascia Doors - Infiniton FGC-BB178 Manual De Usuario

Mounting the Fascia Doors

• Ensure that there is a gap of 3 to 4mm between the non-hinged
side and the cabinet wall.
• Locate the slider in the bracket and fix the slider to the fascia door
20 to 22mm from the edge of the fascia as shown in Fig. 11,
ensuring that the slider is positioned centrally and horizontally within
the bracket. Tighten securely by hand.
• Fill the gap on the non-hinged side with the gasket/seal strip
provided, as shown in Fig. 12.
• The finished look for the door sliders should be similar to those
shown in Fig. 13, which shows 2 sliders in place.
• Ensure theappliancedoors open, close andsealproperly.
20 mm
Fig. 11
Fig. 12
Gasket
x4
22
Fig. 13
Decor door
Fig. 13