Safety Instructions - LaserLiner ActiveFinder XP Manual De Instrucciones

Safety instructions

Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
Safety instructions
Dealing with electromagnetic interference
– The measuring device complies with safety and electromagnetic
compatibility regulations and limit values in accordance with
Directive 2014/35/EU (Low Voltage Directive / LVD) and 2014/30/EU
(Electromagnetic Compatibility Directive / EMC).
– Umarex GmbH & Co. KG hereby declares that the ActiveFinder XP
complies with the essential requirements and other provisions
of the European Low Voltage Directive 2014/35/EU (LVD) and
the Electromagnetic Compatibility Directive 2014/30/EU. The EU
Declaration of Conformity can be found in its entirety at the
following address: http://laserliner.com/info?an=AAD
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
Symbols
Warning about hazardous electrical voltage:
Unprotected live components inside the device housing
are capable of posing a risk of electric shock.
Protection class II: The test device has reinforced or
double insulation.
Overvoltage category IV: Devices such as electricity
meters, overcurrent circuit breakers and ripple-
control units, which are intended for use at or near
the infeed into the electrical installation of buildings,
and specifically from the main distribution to the
supply system.
10
EN