Setting - Shenzhen Urion Technology U80R Manual De Usuario

SETTINGS
Having inserted the batteries, set the time and date so that any
future stored measurements are saved in the memory with the
correct time and date. You may also take measurements without
fast setting the time and date.
1. Set user
Press the USER button ( B03) or press the SET button a few
seconds ( B03 ) , a displayed (1) will flash on and off. Press the
MEMORY button to adjust (1) or (2). The default user is (1).
2. Set the year
Press the SET button, a displayed year will flash on and off. Press
the MEMORY button to adjust year. Pressing this button for long,
the digit will increase quickly.
3. Set date & hour
Then press the SET button again, the month digits will appear and
flash. Again, repeat pressing MEMORY button to adjust the month.
With pressing the SET button, the date, hour and minute digits will
flash, repeat adjusting them by pushing the MEMORY button.
4. When you finish the setting you can press the SET button to exit
the setting and turn off the device as well.
8