Care And Maintenance; Calibration - Shenzhen Urion Technology U80R Manual De Usuario

Care and Maintenance

* Do not expose the BP monitor to extreme temperature, moisture,
dust or direct sunlight.
* The cuff contains a sensitive airtight bulb. Treat it with care and
avoid any stress by torsion or kinking.
* Clean the BP monitor with a soft cloth. Do not use fuel, thinner or
other solvent. Remove specks on the cuff carefully with a wet cloth
and soap water
* Do not wash the cuff.
* Do not drop the BP monitor or treat it with force.
* Do not try to open the BP monitor . This will make the factory
calibration invalid.
* If the unit has been stored at temperatures below 0 °C(32°F),
leave it in a warm place for about 15 minutes before using it.
Otherwise, the cuff may not inflate properly.
* Do not attempt to disassemble the unit.
* Do not crush the cuff.
* When the unit will not be used for a long time (30 days or more),
be sure to remove the batteries.

Calibration

This product has been calibrated at the time of manufacture. If
used according to the use instructions, periodic recalibration is not
required. If at any time, you question the measuing accuracy,
please contact an authorized Service Center.
14