Positioning the Pressure Cuff
CAUTION:
Do not use the unit for any purpose other tan measuring blood
pressure. Also, do not use the unit in conjunction with other
devices. Improper use may cause a malfunction or personal injury.
1. Fasten the cuff on your left upper arm. It Will be best to use a
bare arm.
2. Make sure the cuff is not too tight. The cuff's lower Edge should
be approximately one inch from the crook of the arm.
3. The unit can be use don either the left or the right wrist. When
taking blood pressure measurements using the right hand position
the cuff as it shows.
9