Metra 99-8229S Instrucciones De Instalación página 5

ISO DIN HEAD UNIT PROVISION
1 Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
Secure the radio housing brackets
to the radio housing with four #8 3/8"
Phillips screws provided. (Fig. A)
3 Attach the pocket to the bracket/
radio housing assembly with the four
#8 3/8" Phillips screws provided.
(Fig. B)
4
Align the holes in the radio housing
brackets with the holes in the ISO
DIN Head Unit and secure the
brackets to the head unit with the
screws included with the unit.
(Fig. C)
99-8229S KIT ASSEMBLY
A
B
C
Continued on PG. 4 ......................
3