Metra 99-8229S Instrucciones De Instalación página 7

DDIN HEAD UNIT PROVISION
1 Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2
Secure the radio housing brackets
to the radio housing with four #8 3/8"
Phillips screws provided. (Fig. A)
3
Slide the Double DIN head unit into
the bracket/radio housing assembly
and secure the Double DIN head unit
4
to the assembly using the screws
supplied with the radio. (Fig. B)
Attach the outer a/c vent trim panel
to the radio housing using the factory
hardware. (Fig. C)
5
Reassemble dash in reverse order of
disassembly.
99-8229S KIT ASSEMBLY
A
B
C
5