Installation Accessory - EAS ELECTRIC ECRL120P Manual De Instrucciones

2. INSTALLATION ACCESSORY

Select the installation location
Don't install at the place where cover with heavy oil, vapor or sulfureted
gas, otherwise, this product would be deformed that would lead to system
malfunction.
Preparation before installation
1. Please confirm that all the following parts you have been supply.
No.
Name
1 Wire controller
Installation and owner's manual
2
Screws
3
Wall plugs
4
Screws
5
Plastic screw bars
6
7 The connective wires group-1
8 The connective wires group-2
9 Battery
2. Prepare the following assemblies on the site.
No.
Name
1
Switch box
Wiring Tube
2
(Insulating Sleeve and
Tightening Screw)
Qty.
1
1
M4X20 (For Mounting on the Wall)
3
For Mounting on the Wall
3
2 M4X25 (For Mounting on switch box)
For fixing on switch box
2
1 Optional
1 Connect to mainboard
1
Qty.(embeded
(only for reference)
into wall)
1
1
36
Remarks
Specification
Remarks
V.2