EAS ELECTRIC ECRL120P Manual De Instrucciones página 36

2. INSTALLATION ACCESSORY
Precaution of install the wire controller
1. This manual provides the installation method of wire controller.
Please refer to the wiring diagram of this installation manual to
wire the wire controller with indoor unit.
2. The wire controller working in low voltage loop circuit. Forbid to
directly contact the cable of 220Vcommercial electricity or of
380V high voltage, and don't wire this kind of wire in the said
loop; wiring clearance between configured tubes should at the
range of 300~500 or above.
3. The Shielded wire of the wire controller must be grounded
reliable.
4. Upon finish the wire controller connection, do not employed
tramegger to detect the insulation.
5. The connective cable of wire controller should not be longer
than 20 meters.
37
V.2