Other Peripherals; Power Supply To The System - Airzone Flexa 3.0 Guía Rápida

OTHER PERIPHERALS

Follow the instructions on their technical data sheet.
Important: For elements with external power supply at 110/230 VAC, it is only necessary to
connect poles "A" and "B" of the bus for communications.
EN

POWER SUPPLY TO THE SYSTEM

Use input power supply to power the main
control board at 110/230 VAC as well as
any other control elements that require
external power supply. Use 3x1.5 mm² cable.
For added security, secure the wires using
the turret.
The connection to the external power
supply must include a main switch or
other method of disconnection that
includes a constant separation for all
polarities, in accordance with appropriate
local and national regulations. The system
will automatically restart if the power
supply is turned off. Use separate circuits
for the unit that is to be controlled and the
power supply to the system.
Once all the connections have been made,
make sure the cover of the main control
board is correctly replaced.
6