Airzone Flexa 3.0 Guía Rápida página 20

•
Centralized control. This allows you to define whether or not your installation has a
centralized controller. By default, it will be configured as deactivated.
•
BACnet . (Only in installations with AZX6BACNET) This parameter shows the device ID,
1
uplink port, IP address, subnet mask and gateway IP and allows you to modify them. Click
on the desired value, modify the parameters and click on the option to confirm. The default
values are:
EN
- Device ID: 1000
- Port: 47808
- IP address: DHCP
•
Protection mode
closing of the motorized elements.
Parameters not available in Airzone Blueface zero thermostats
1
16
. (Only for Airzone Cloud) This allows you to disable the delay in the
1