Definitions: Safety Guidelines; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - DeWalt DCW682 Traducido De Las Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
EngLIsh
Batteries
Ah Weight (kg) DCB104
Cat #
V
DC
DCB181
18
1.5
DCB182
18
4.0
DCB183/B/G
18
2.0
DCB184/B/G
18
5.0
DCB185
18
1.3
DCB187
18
3.0
DCB189
18
4.0
DCBP034
18
1.7
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
Karl Evans
Vice President Professional Power Tools EANZ GTS
D
WALT UK, 270 Bath Road, Slough
e
Berkshire, SL1 4DX
England
15.02.2022
a
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.

GENERAL POWER TOOL SAFETY WARNINGS


WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
32
DCB107
0.35
22
70
0.61
60/40**
185
0.40
30
90
0.62
75/50**
240
0.35
22
60
0.54
45
140
0.54
60
185
0.32
27
82
Chargers/Charge Times (Minutes)***
DCB112
DCB113
DCB115
45
35
22
120
100
60
60
50
30
150
120
75
40
30
22
90
70
45
120
100
60
50
40
27
SAVE ALL WARNINGS AND INSTRUCTIONS
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless)
power tool.

1) Work Area Safety

a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.

2) Electrical Safety

a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
DCB116
DCB117
DCB118
22
22
22
60/45** 60/40** 60/40**
30
30
30
75/60** 75/50** 75/50**
22
22
22
45
45
45
60
60
60
27
27
27
FOR FUTURE REFERENCE
DCB132
DCB119
22
45
60
120
30
60
75
150
22
40
45
90
60
120
27
50

Publicidad

Tabla de contenido
loading

Tabla de contenido