Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Frequency selector button
2.
Radio frequency window
3.
Speaker
4.
On/Off/volume adjustment button
5.
Telescopic aerial
6.
Mains socket input
7.
Battery compartment
Mains supply
•
Place the device in the required position.
•
Connect the mains adapter to the product (6).
•
Then connect the mains adapter to a power socket.
Battery power
•
Remove the lid from the battery compartment (7) by sliding it downwards.
•
Insert 4 1.5 V LR6 batteries (AA/AM3) taking care to respect the polarity indicated.
•
Replace the lid (7).
Operation
•
Turn the On/Off/volume adjustment button (1) to the right to switch on the radio. You will hear a soft
"click" when you switch the radio on.
•
Select the desired radio station by turning the frequency selector (2).
•
Adjust the volume using the On/Off/volume adjustment button (4).
•
To switch the radio off, turn the On/Off/volume adjustment button (1) to the left until you hear a soft
"click".
•
To improve the radio reception, extend the telescopic aerial (5) and then adjust its position, length
and angle to obtain optimum reception quality.
Appliance technical specifications
Type
Speaker
Peak power
Consumed power
Signal/noise ratio
Size
Battery run time
Adapter characteristics
•
Name of manufacturer of the adapter or registered trademark : Tianhangxing electronics
•
Adapter model number : THX-050100KDV
•
Input voltage and frequency : 100-240 V, 50/60 Hz
•
Voltage, current and output power : 5.0 V---1.0 A, 5.0 W
Features:
3 W
9 W
3.2 W
45 dB
222 x 147 x 63 mm
520 minutes at 50% volume/95 minutes at 100% volume
Type
Impedance of the speaker 4 Ω
Effective power
Absorbed power
FM frequency
Weight
- EN 8 -
Specifications
3 W
AC 230 V 50 Hz or 4 1.5 V
LR6 batteries (AA/AM-3)
88.8-108 MHz
0.6 kg
Publicidad
