Problems And Solutions - Domo DO726BL Manual De Instrucciones

· Clean the inside of the jug with a soft sponge. Do not use a scouring pad as this will scratch the base.
Never use aggressive cleaning agents.
· After cleaning, dry all parts thoroughly.

PROBLEMS AND SOLUTIONS

Problem
The appliance does not
work.
The appliance stops when
in use.
The appliance vibrates
excessively.
The lid is leaking or
overflowing.
The bottom of the blender
pitched is leaking.
The blades do not turn
easily.
30
DO726BL
Cause
There is something wrong with
the power connection.
The pitcher is not properly
positioned on the base. Or the
lid is not correctly positioned on
the pitcher.
The control panel does not
respond.
Overheating.
Overload or overheating.
The device is not stable.
The device is overloaded.
The device is overloaded.
The lid is not positioned
properly.
The water-tightness has
deteriorated.
Too many ingredients or these
are too hard.
The liquid in the pitcher is too
hot and deforms the silicone
seal.
Solution
Insert the plug into a power socket.
Check that the pitcher and lid are
positioned correctly.
Pull the plug from the power socket.
Wait 1 minute and then plug it in
again.
Switch off the appliance and leave to
cool for 15-20 minutes.
Switch off the appliance and leave to
cool for 15-20 minutes.
Place the appliance on a flat and
stable surface.
Remove some of the ingredients from
the pitcher.
Remove some of the ingredients from
the pitcher.
Make sure that the lid is placed
correctly.
The blades cannot be removed.
Contact the after-sales department.
Remove some of the ingredients from
the pitcher. Cut the ingredients into
smaller pieces.
Contact the after-sales department.