DO441BL
USING THE BLENDER
1. Peal the fruit or vegetables and cut them into small pieces.
2. Put all foods that are to be blended into the jar. It is recommended to also
always add pure water to facilitate a smooth operation of the blender. The ideal
proportion of food/water is 2 to 3. The content of the jar should not exceed the
maximum indication on the jar.
Caution: Never use boiling liquids or do not use the blender when the jar is empty.
3. Place the lid onto the jar. Make sure that the measuring cup is well in place in the
lid.
4. Plug in the blender.
5. Turn the speed knob to the required speed.
6. For quick and accurate blending, turn the speed knob to the P position and hold
for a few seconds. When you release the knob, it will automatically reset itself to
the 0 position. You can do this a few times in a row, until the desired consistency
has been reached.
7. If you want to add ingredients while you are blending, remove the measuring cup
from the lid and put the extra ingredients into the jar through this fill opening.
8. When crushing ice or blending hard foods, keep 1 hand firmly onto the lid.
9. Turn off the blender by setting the speed knob to 0.
10. Unplug the blender after use.
Caution: For each use, the consecutive operation time should not exceed 3
minutes. Between two continuous cycles at least 10 minutes resting time should
be maintained. The appliance needs to cool down to room temperature before
starting the next blending cycle.
IMPORTANT TIPS
•
When blending solid foods with liquids, first pour the liquids into the jar and only
then add the solid foods.
•
What you can not do with the blender: whipping egg whites, whipping cream,
mashing potatoes, grinding meat, mixing dough, extracting the juice out of fruit
and vegetables.
•
Never put the following ingredients into the blender: bones, large pieces of solid,
frozen foods or tough foods such as turnips.
•
To crush ice, put 6 ice cubes into the jar. If you need more crushed ice, remove
the measuring cup from the lid and add the ice cubes one by one through the fill
opening.
CLEANING AND MAINTENANCE
1. Pour some warm soapy water into the jar and turn the speed knob for a few
seconds to the P position. Empty the jar.
2. Unplug the blender before continuing with cleaning.
34