Grounding Instructions; Tools And Materials - Kohler Veil K-5402-0 Instrucciones De Instalación

Grounding Instructions

This product should be connected to a grounded, metallic, permanent wiring system, or an equipment-grounding
conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the
product.
DANGER: Risk of electric shock. Grounding this product improperly can result in a risk of electric shock.
If repair or replacement of the power cord is necessary, do not connect the grounding wire to either of the other terminals.
Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if
in doubt whether the product is properly grounded.
This installation must have a Class A Ground-Fault Circuit-Interrupter (GFCI), which protects against line-to-ground
shock hazard. Use a 100 VAC - 240 VAC, 50 Hz - 60 Hz supply.
*Outside North America, this may be known as a Residual Current Device (RCD).

Tools and Materials

Plumbers Silicone Grease 3/4"
Plus:
• Rug or Protective Material
1247364-2-C
Kohler Co. 3