Kohler Veil K-5402-0 Instrucciones De Instalación página 7

4. Install the Pipes
Carrier
Finished Wall
3" (76 mm)
Verify that the openings of the gaskets on the inlet and outlet holes are well lubricated with plumbers grease. Reapply
plumbers grease if necessary.
Insert the inlet pipe into the inlet hole.
Insert the outlet pipe into the outlet hole.
Adjust the Threaded Rods
Adjust the threaded rods until they each extend 3" (76 mm) from the finished wall.
Place a washer onto each threaded rod.
Thread a jam nut over each threaded rod.
Tighten the jam nuts to lock the rods in position.
Kohler Co. 7
Inlet Pipe
Outlet Pipe
1247364-2-C