Kohler Veil K-5402-0 Instrucciones De Instalación página 9

Ocultar thumbs Ver también para Veil K-5402-0:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Connect the Supplies
WARNING: Risk of electric shock. Disconnect the power before performing the following procedures.
WARNING: Risk of electric shock. Connect only to a properly grounded Ground-Fault Circuit-interrupter (GFCI)
or Residual Current Device (RCD) for protection against line-to-ground shock hazard.
IMPORTANT! If you are unsure how to correctly connect the power to the bowl, consult a qualified electrician or service
technician. Improper power supply connection will lead to product damage.
Connect the Electrical Supply
Remove the cover from the junction box on the toilet.
Connect the electrical wires to the proper ports. The port labeled "L" is live, the port labeled "N" is neutral, and the
bottom port is the ground.
Reinstall the junction box cover.
Connect the black control cord from the carrier to the black control cord from the toilet.
Connect the Water Supply
Connect the water supply hose to the supply shut-off.
Confirm that the supply shut-off handle operates correctly.
Turn ON the water supply to the in-wall tank.
Turn the water supply handle to the "ON" position.
Check all connections for leaks.
Kohler Co.
9
Handle
Hose
L
N
Ground
1247364-2-C

Publicidad

Tabla de contenido
loading

Tabla de contenido