HumanTechnik earis XS Instrucciones De Servicio página 37

3. The white status LED on the transmitter lights up as soon as the trans-
mitter is in contact with the receiver and a transmission is established.
4. Adjust to the desired volume.
5. The pocket receiver switches off automatically when you place it in the
charging dock. We recommend to always return the receiver to the
transmitter's charging dock so that the battery is always charged. If no
audio signal reaches the transmitter for more than 15 minutes, it will
switch off automatically.
6. As an alternative, the pocket receiver can also be switched on and off
by prolonged pressing of the ON/OFF switch on the upper left side of
the receiver. If no audio signal reaches the pocket receiver for more
than 15 minutes, it will switch off automatically
For best performance and range, place the receiver correctly. If possible,
the receiver should have a line of sight with the transmitter.
If possible and for ease of use, hold the receiver in your hand while having
visual contact to the transmitter.
The clip on the rear side of the receiver can be used to fasten the "earis XS"
pocket receiver to your belt or clothing.
You can also wear the receiver on the optional neckloop by attaching the
receiver to the loop of string coming out of the bottom of the neckloop's
housing. Thread this loop of string through the eyelet in the receiver and
form a sling by putting the entire neckloop through the string's loop.
Earis_XS_PR_BA_DE_EN_F_NL_E_I_pocket2200808.indd 37 Earis_XS_PR_BA_DE_EN_F_NL_E_I_pocket2200808.indd 37
English 37
10.08.2022 08:22:56 10.08.2022 08:22:56