Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Reference Guide
FUNCTION
PROCEDURE
• Press any numeric key. If you still hear the dialing tone, change to
VERIFYING THE DIALING
MODE (TONE/PULSE)
the other dialing mode.
• The switch located on the bottom of the telephone allows you to do
three adjustments:
SWITCHING THE DIALING
MODE (TONE / PULSE)
TEMPORARY CHANGOVER
OF DIALING MODE (TONE /
PULSE)
+
SETTING THE RINGER
...
VOLUME / MELODY
REDIAL
MUTE
FLASH
STORING PHONE NUMBER IN
THE ONE-TOUCH MEMORIES
...
USING THE ONE-TOUCH
MEMORIES TO MAKE A CALL
STORING PHONE NUMBER IN
...
THE TWO-TOUCH MEMORIES
...
USING THE TWO-TOUCH
MEMORIES TO MAKE A CALL
...
P
PULSE
T1 TONE flash 100 ms
T2 TONE flash 250 ms or 600 ms (depending on the
telephone model)
After establishing a call, change to TONE by pressing the
key
(i.e. to use telebank services).
Lift the handset
Press the MUTE key followed by the key
Press one of the keys
to
Press the MUTE key
Hung up
To redial the last dialed number, press the REDIAL key
By pressing the MUTE key during a call, the handset will
deactivate the voice transmission. To go back to
conversation, press the MUTE key again.
Press the FLASH key to access specific special services
(follow me, call waiting, conference, etc.).
Lift the handset and press the MUTE key
+
Press the desired one-touch memory key
Enter the phone number to be stored
Press the MUTE key
Lift the handset
Press the desired one-touch memory key
Lift the handset and press the MUTE key
+
Press the MEM key
Press the desired memory number (
Enter the phone number to be stored
Press the MUTE key
Lift the handset
Press the MEM key
Press the desired memory number (
12
to
)
to
)
Publicidad
