Whalen SPLS-PE48D Manual De Instrucciones página 18

25. Align and attach the Drawer Box Bottom Support (X) to the Right Side Frame (R) and Back Support
with Mounting Holes (W) properly using two 15 mm Bolts (1) with Washers (5 and 6). DO NOT fully
tighten the bolts in this step.
26. Align and attach the drawer box assembly to the Right Side Frame (R) with two 32 mm Bolts (3) and
two Washers (5 and 6), make sure that the top edges are flush with each other.
Assembly Instructions
T
Q
C
B
Q
R
X
W
U
R
D
18
X
W
C
6
5
3
D
1
5
6
R