Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12. TROUBLESHOOTING
Listed below are a few common problems the user
may encounter, with solutions.
Unit doesn't respond when I move the faders.
Scenes don't playback after I record them.
Scenes don't playback correctly like I recorded
them.
Chases don't playback after I record them.
Design and product specifications are subject to change without prior notice.
•
Make sure address is correct.
•
Make sure speed is adjusted, if available, for
faster movement.Not all Fixtures have a speed
adjustment.
•
If total of XLR cable is more than 90 feet make
sure it is terminated properly.
•
Make sure to press MIDI/RECORD BUTTON, be-
fore pressing SCENE BUTTON. LED's should blink
after pressing each SCENE BUTTON .
•
Make sure you are in the correct Bank that has
scenes recorded.
•
Is the Fade Time to long for Speed selected?
•
Make sure you are in the correct Bank that has
scenes recorded.
•
If total of XLR cable is more than 90 feet make
sure it is terminated properly.
•
Make sure to press MIDI/RECORD BUTTON, after
pressing SCENE BUTTON. LED's should blink
after pressing MIDI/RECORD BUTTON.
•
Make sure you are in the correct Chase that has
steps recorded.
•
If in Auto Mode, is It selected in Display. Did you
adjust Speed after selecting Auto?
•
Is Fade Time to long for Speed Selected?
•
If total of XLR cable is more than 90 feet make
sure it is terminated properly.
P. 13
| Tecshow Navigator 3
English version
Publicidad
Tabla de contenido
